USD $143.50 USD $269.50Price range: USD $143.50 through USD $269.50
Single door handle – face mount
• Solid stainless steel construction
• Mounting hardware included for a minimum 1″ [25mm] door thicknesses.
• See available downloads below for CAD – 3D – PDF Specifications
FOR OPTIONAL COLOR MATCHING OR SPLIT FINISH BACKPLATES:
The ‘I’ face-mount handle is a straight bar in hand-welded solid 304 stainless steel that fixes to the door surface, not through it, projecting 2″ (51 mm) from the door face, in 18 1/2″, 24 1/2″ and 30 1/2″ lengths (18″, 24″ and 30″ center to center). No thru-holes and nothing on the back face, so it suits sliding barn doors, bypass and pocket panels, and swing doors that must sit flat to a wall. Designed and assembled in Vancouver, BC; ships in 1–3 workdays.
| Profile | ‘I’ — straight both ends; D-section bar |
| Material | Solid 304 stainless steel, hand-welded |
| Bar section | 1″ x 1/2″ (25 x 13 mm) D-profile |
| Projection (from door face) | 2″ (51 mm) |
| Overall length | 18 1/2″, 24 1/2″, 30 1/2″ |
| Center to center | 18″, 24″, 30″ |
| Mount | Face mount (concealed surface fixing) — no thru-holes; surface mounting hardware included |
| Door thickness | Minimum 1″ (25 mm) for the surface screws; no maximum |
| Finishes | Brushed, Polished, Matte Black, Satin Brass PVD, White |
| Applications | Sliding barn doors, pocket and bypass panels, swing doors, wardrobe doors |
| Origin | Designed and assembled in Vancouver, BC; manufactured in China |
| Shipping | In-stock orders ship in 1–3 workdays from Vancouver, BC; free shipping over $500 |
| Warranty | Limited lifetime residential warranty on materials and workmanship (commercial: 5 yr brushed stainless, 2 yr coated). Full terms: jwlhome.com/warranty |
| Downloads | DWG (CAD), 3D, PDF spec sheet |
Straight at both ends on a 1″ x 1/2″ D-section bar — the same section, projection, lengths and five finishes as the thru-bolt ‘I’, so a barn door and a panel-ready refrigerator in the same room can carry the same handle. The ‘J’ and ‘L’ face-mount handles offer a rounded or squared end on the same fixing.
Concealed surface fixing: the mounting hardware screws into the door face, with no fasteners visible and no holes through the door. Surface mounting hardware is included for doors at least 1″ (25 mm) thick; there is no upper thickness limit. Mark the center-to-center spacing from the DWG or PDF drawing in Downloads and check the 2″ projection against the track and wall clearance of a sliding door.
Solid 304 stainless steel resists corrosion in kitchens and bathrooms. Wipe with a damp cloth and mild soap and dry. Avoid chlorine-based cleaners and abrasive pads on the coated Matte Black, Satin Brass PVD and White finishes. Check thru-fixings once a year and snug them if the door has moved.
The surface mounting screws need a door at least 1″ (25 mm) thick to bite; there is no maximum, because nothing passes through the door. For thinner doors or panels 3/4″–2 1/4″ thick where a through-fixing is acceptable, use the thru-bolt ‘I’ handle instead.
The handle projects 2″ (51 mm) from the door face. Standard barn door tracks hold the door roughly 1/2″–1″ off the wall, so mount the handle on the room-facing side, or on the wall side only if the track’s stand-off plus any spacer exceeds 2″. Check the track manufacturer’s clearance before drilling.
Most 84″–96″ barn doors take the 30 1/2″ handle (30″ center to center) for proportion; the 24 1/2″ (24″ C/C) suits standard 80″ doors and swing doors, and the 18 1/2″ (18″ C/C) suits narrow panels and wardrobe doors. Mount with the grip centred about 36–42″ above the floor.
Order face mount when the back of the door must stay clean or cannot be drilled through — barn, bypass and pocket doors, or doors with a panel on the reverse. Order thru-bolt when the handle bolts through a door or appliance panel 3/4″–2 1/4″ thick. Both share the same bar, projection, lengths and finishes.
All five finishes — Brushed, Polished, Matte Black, Satin Brass PVD and White — are shared across JWL door handles, back-to-back sets and cabinet pulls, so one finish can run through a whole kitchen. Brushed and Polished are bare 304 stainless; Matte Black, Satin Brass PVD and White are coatings over the stainless. Order a hardware sample if you need to check colour against your cabinetry.
In-stock orders ship in 1–3 workdays from Vancouver, BC, to Canada and the US, with free shipping on orders over $500. JWL hardware carries a limited lifetime residential warranty on materials and workmanship; commercial installations are covered for 5 years on brushed stainless and 2 years on coated finishes. Full terms are at jwlhome.com/warranty.
Email: [email protected]
© JWL Hardware – All Rights Reserved
Trade Accounts | Privacy Policy | Site Map | Terms & Conditions
384-8250 Manitoba St., Vancouver
BC, Canada, V5X-0L6
