Stainless Steel Cabinet Pulls and Knobs
J PULL SERIES
L PULL SERIES
I PULL SERIES
T PULL SERIES
This page lists JWL’s cabinet pulls: hand-welded solid 304 stainless steel bar pulls with a 1/2″ x 1/4″ section, 1″ (25 mm) projection and center-to-center sizes of 128/192/256/320 mm (I series) or 5″/7.5″/10″/12.5″ (J and L series), plus a single-fixing T knob. They suit kitchen cabinets, vanities, drawers, closets and custom millwork, and match JWL’s appliance and door handles. Designed and assembled in Vancouver, BC; in-stock orders ship in 1–3 workdays.
How to choose
- Pick a shape: I is straight both ends, J has one rounded end, L has both ends squared, T is a single-point knob for narrow fronts
- Match center-to-center to your drilling: I series is metric (128/192/256/320 mm); J and L are 5″/7.5″/10″/12.5″
- Choose one of five finishes: Brushed, Polished, Matte Black, Satin Brass PVD, White
- Mount vertically on doors or horizontally on drawers; all pulls project 1″
- Two 1 7/8″ break-off 8-32 screws are included for common door and drawer thicknesses
What’s on this page
Four series of cabinet pulls in four lengths each, plus the T knob. Each product page carries pricing by finish, DWG, 3D and PDF spec-sheet downloads. Trade accounts can register at /wholesale-registration-page/ for trade pricing; a hardware samples page is available for finish checks.
Compare the products on this page
| Product | Mount | Projection | Sizes | Page |
|---|---|---|---|---|
| I Series Cabinet Pull | Rear 2-hole, 8-32 screws | 1″ (25 mm) | 128/192/256/320 mm | View |
| J Series Cabinet Pull | Rear 2-hole, 8-32 screws | 1″ (25 mm) | 5″/7.5″/10″/12.5″ | View |
| L Series Cabinet Pull | Rear 2-hole, 8-32 screws | 1″ (25 mm) | 5″/7.5″/10″/12.5″ | View |
| T Series Cabinet Knob (single pull) | Single hole, screw included | 1″ (25 mm) | Single size | View |
Frequently asked
What center-to-center sizes are available?
I series pulls are drilled at 128, 192, 256 and 320 mm center to center; J and L series at 5″, 7.5″, 10″ and 12.5″ (126/190/254/318 mm). The T knob uses a single hole. Measure existing holes before ordering, because the metric and imperial series differ by about 2 mm at each size.
Will these pulls match JWL appliance and door handles?
Yes. The cabinet pulls share the same D-profile shapes (I, J, L), the same five finishes and the same 304 stainless steel as JWL’s appliance handles, thru-bolt door handles and glass door handles, so a kitchen can run one consistent hardware set from drawers to a panel-ready fridge.
Which finishes are available?
All stainless handles and pulls come in five finishes: Brushed, Polished, Matte Black, Satin Brass PVD and White. The same five finishes run across cabinet pulls, appliance handles, door handles and glass door handles, so one finish can be carried through a kitchen, bathroom and closet without mixing suppliers.
Are the screws included, and what door thickness do they fit?
Each pull ships with two 1 7/8″ break-off 8-32 screws. Snap the screw at the scored point closest to your door or drawer-front thickness, then fasten from the back through standard 8-32 drilled holes. Projection is 1″ (25 mm) on every size.
How fast do orders ship, and what is the warranty?
In-stock orders ship in 1–3 workdays from Vancouver, BC to Canada and the US, with free shipping on orders over $500. Stainless handles carry a limited lifetime residential warranty on materials and workmanship (commercial: 5 yr brushed stainless, 2 yr coated). Full terms are at jwlhome.com/warranty.
