Single cabinet door pull – 5 inch centre to centre
• Solid stainless steel construction
• 2 x 1 7/8″ break-off mounting screws included
• See available downloads below for CAD – 3D – PDF Specifications
Description
The J126 is JWL’s ‘J’ Series cabinet pull at 5″ (126 mm) center to center: a hand-welded solid 304 stainless steel bar, one rounded end, one squared end, thru-front mounted, projecting 1″ (25 mm). It is the upper-cabinet and small-drawer size, usually the highest-quantity line on a kitchen order; the series runs 5″, 7.5″, 10″ and 12.5″ (126, 190, 254 and 318 mm) so one profile covers a whole kitchen. Designed and assembled in Vancouver, BC; in-stock orders ship in 1-3 workdays.
Specifications
| Profile | ‘J’ – one rounded end, one squared end |
| Material | Solid 304 stainless steel, hand-welded |
| Bar section | 1/2″ x 1/4″ |
| Projection (from door face) | 1″ (25 mm) |
| Center to center | 5″ (126 mm) |
| Mount | Thru-front, 2 holes; 2 x 1 7/8″ break-off 8-32 screws included |
| Door thickness | Standard drawer and door fronts; included 8-32 screws break to length |
| Finishes | Brushed, Polished, Matte Black, Satin Brass PVD, White |
| Applications | Kitchen cabinets, upper cabinets, small drawers and vanity doors; bath vanities, laundry and closet millwork |
| Origin | Designed and assembled in Vancouver, BC |
| Shipping | In-stock orders ship in 1-3 workdays from Vancouver, BC; free shipping on orders over $500; ships to Canada and US |
| Warranty | Limited lifetime residential warranty on materials and workmanship (commercial: 5 yr brushed stainless, 2 yr coated). Full terms: jwlhome.com/warranty |
| Downloads | DWG (CAD), 3D model, PDF spec sheet |
Profile
The ‘J’ profile has one rounded end and one squared end, with a curved underside that fills the hand. The bar section is 1/2″ x 1/4″, hand-welded from solid 304 stainless steel and finished in one piece with no visible fixings. Mount it with the rounded end up on doors or to one side on drawers; the asymmetry reads as a deliberate detail across a run of fronts.
Sizing
Center to center is 5″ (126 mm); measure existing holes before ordering, because JWL’s ‘J’ spacing is in inches (126/190/254/318 mm), a few millimetres off the 128/192/256/320 mm metric standard. Use this size for upper cabinets, small drawers and vanity doors. As a rule of thumb, keep the pull at one-third to one-half of the front width and step sizes within the series.
Installation
Two 1 7/8″ break-off 8-32 screws are included. Drill two 5 mm holes at 5″ (126 mm) on center, snap each screw at the groove closest to the front thickness, and tighten from inside the drawer or door. Standard 3/4″ (19 mm) fronts need no extra hardware; for unusually thick fronts, buy longer 8-32 machine screws locally. DWG, 3D and PDF spec sheet downloads are on the page.
Frequently asked
Which ‘J’ Series size do I need, and what are the other sizes?
The J126 is 5″ (126 mm) center to center and suits upper cabinets, small drawers and vanity doors. The other ‘J’ Series sizes are 7.5″ (190 mm) at https://jwlhome.com/product/cabinet-pull-7-inch-center-to-center/; 10″ (254 mm) at https://jwlhome.com/product/cabinet-pull-10-inch-centre-to-centre/; 12.5″ (318 mm) at https://jwlhome.com/product/cabinet-pull-12-5-center-to-center/. All four share the same 1″ projection, 1/2″ x 1/4″ bar section and five finishes, so you can mix sizes across one kitchen without a visible change in profile.
Will this pull fit holes drilled for another brand?
Only if the existing holes are 126 mm (5″) apart. Many fronts are drilled to the metric standard (128 mm), which is a few millimetres off and will not align. For metric-drilled fronts choose the JWL ‘I’ Series; for new fronts, drill 5 mm holes at 5″ (126 mm) on center.
How far does the pull stand off the front, and will it clear appliances and adjacent doors?
Projection is 1″ (25 mm) from the front face to the outside of the bar, with roughly 3/4″ of finger clearance behind it. That is low enough to clear most fridge and dishwasher doors and to avoid clashing at inside corners, but check corner cabinets where two fronts meet at 90 degrees.
Do the finishes match JWL door handles and appliance handles?
Yes. Brushed, Polished, Matte Black, Satin Brass PVD and White are the same five finishes used across JWL’s ‘I’, ‘J’, ‘L’, ‘U’ and ‘P’ door handles, appliance handles and the ‘T’ Series knob, all on 304 stainless steel. Order every item in the same finish name and it will match; see the hardware samples page to confirm colour before a large order.
What is the lead time, and what warranty applies?
In-stock orders ship in 1-3 workdays from Vancouver, BC, to Canada and the US, with free shipping on orders over $500. JWL cabinet pulls carry a limited lifetime residential warranty on materials and workmanship; commercial use is covered 5 years for brushed stainless and 2 years for coated finishes. Full terms at jwlhome.com/warranty.
