A solid white oak or walnut door handle with a single-sided thru-bolt mount, concealed metal corner supports, and a 2-inch (51 mm) projection from the door face. Choose a D profile (flat back, rounded face) or a Round profile, narrow or wide, in 12″, 18″, 24″ and 30″ centre-to-centre sizes (narrow bar 12–24″, wide bar 18–30″). Made in-house in Vancouver, BC and used as a wood appliance pull on panel-ready refrigerator, freezer and dishwasher panels, and as a handle on pantry and swing doors, sliding barn doors and millwork.
Specifications
| Material |
Solid North American white oak or walnut; concealed internal metal corner supports |
| Profile shapes |
D profile (IW series) · Round profile (RW series) — select from the Handle Profile Shape menu |
| Bar width |
D Narrow 3/4″ (19mm) · D Wide 1″ (25mm) · Round Narrow 5/8″ (16mm) · Round Wide 7/8″ (22mm) |
| Center-to-center |
Narrow: 12″ / 18″ / 24″ (305 / 457 / 610mm) · Wide: 18″ / 24″ / 30″ (457 / 610 / 762mm) |
| Overall length |
12-5/8″ · 18-5/8″ · 24-5/8″ · 30-5/8″ (C/C plus 5/8″) |
| Mount |
Thru-bolt, single handle, concealed fasteners — connection hardware (CH-01) included |
| Door thickness |
3/4″–2 1/4″ (19–57 mm) |
| Wood finishes |
Oak: Clear · Uncoated · Black · Exterior | Walnut: Clear · Uncoated · Exterior |
| Backplates |
Optional B-300 single-handle backplate set, sold separately in Polished, Brushed, Matte Black, Satin White or Satin Brass PVD stainless |
| Downloads |
Spec sheet (PDF) · CAD (.dwg) · 3D model (.skp) — see above |
| Projection (from door face) |
2″ (51 mm) |
| Origin |
Made in-house in Vancouver, BC, Canada |
| Lead time |
In-stock sizes ship in 1–3 workdays from Vancouver, BC. Custom lengths: 3-week lead time, 10-unit minimum (see Custom Handles) |
| Warranty |
Limited lifetime residential warranty on materials and workmanship; 1 year commercial. Full terms: jwlhome.com/warranty |
D profile or Round profile?
Both profiles are the same price and share the same lengths; they differ in section only. The D profile sits flat against the door with a rounded outer face — the wood match to JWL’s ‘I’ and ‘L’ stainless bar pulls, and the choice for a squared, architectural line. The Round profile is a full radius bar that reads softer and is the natural partner to the ‘J’ series comfort-grip pulls. Narrow bars suit drawers, pantries and appliance panels; wide bars suit full-height doors, barn doors and anywhere the handle carries the door’s weight.
Installation
Thru-bolt mounting pulls the handle tight to the door face with no visible fasteners on the grip side; hardware for 3/4″ to 2-1/4″ doors ships in the box. Drill at the listed center-to-center. For thicker slabs, request longer screws at checkout or by email. For handles on both faces of a door, or for glass, see the Wood Door Handle – Back to Back.
Finish guidance
Clear-finish oak and walnut arrive sealed and ready to install; uncoated handles arrive raw for site-finishing to match millwork. Custom stains are available on oak. Add a Satin Brass PVD, Matte Black or stainless backplate to tie the wood into the finish of your metal cabinet pulls.
Frequently asked
How far does the wood handle project from the door?
2 inches (51 mm) from the face of the door to the outside of the handle on all thru-bolt and single-sided JWL wood handles. Back-to-back sets with metal backplates project 2 3/8 inches (60 mm) including the backplate.
What is the difference between the D profile and the Round profile?
The D profile has a flat back and a rounded face, so it sits close to the door and reads as a slim bar. The Round profile is a full round bar. Both come in narrow and wide widths and in the same white oak and walnut options; choose from the profile menu on this page.
Can I use this handle on a panel-ready refrigerator or dishwasher?
Yes. The thru-bolt mount is designed for appliance panels, pantry doors and swing doors. Panel or door thickness from 3/4″ to 2 1/4″ is supported. Check that the center-to-center spacing matches your panel layout; CAD and PDF drawings are in the Downloads section.
Which wood finish should I choose?
Clear oak keeps the natural pale tone; stained oak is darker and warmer; walnut is naturally chocolate-brown. All three are sealed. Order the uncoated option if you want to match an existing stain on site. Wood samples are available to trade accounts.
Where are JWL wood handles made and how long do they take to ship?
Each handle is made in-house in Vancouver, BC from North American white oak or walnut. In-stock sizes ship in 1–3 workdays; custom lengths need a 3-week lead time and a 10-unit minimum. Free shipping on orders over $500. Covered by JWL’s limited lifetime residential warranty.
Ordering
Made in-house in Vancouver, BC. Wood samples are available for designers and trade accounts — email [email protected]. Free shipping over $500. Trade and wholesale pricing available through the JWL trade program.
Alia Bossio –
these handles were a perfect addition to our kitchen. We love them :)
Steve Jelenic –
Hands down exceptional qualiry. I got plenty of comments on my beautiful oak handles – people have never seen them before! Keep up the great work will be ordering again in a few months for my new kitchen.