USD $21.90 USD $49.90Price range: USD $21.90 through USD $49.90
Single cabinet pull – choose the ‘J’ or ‘L’ profile and the size below
• Solid stainless steel construction
• Four sizes: 5″, 7.5″, 10″ and 12.5″ center to center (126, 190, 254 and 318 mm)
• 2 x 1 7/8″ break-off mounting screws included
• See available downloads below for CAD – 3D – PDF Specifications
A stainless steel cabinet pull, hand-welded from solid 304 stainless, thru-front mounted and projecting 1″ (25 mm), in four sizes: 5″, 7.5″, 10″ and 12.5″ center to center (126, 190, 254 and 318 mm). Choose the ‘J’ or the ‘L’ profile: mirror images of one another, both with squared ends and the return on opposite sides. Same bar, same finishes, same price. Used as cabinet handles and drawer pulls on kitchen cabinets, bath vanities, laundry and closet millwork. Designed and assembled in Vancouver, BC; in-stock orders ship in 1-3 workdays.
| Profile | ‘J’ and ‘L’ – mirror profiles, squared ends, return on opposite sides |
| Material | Solid 304 stainless steel, hand-welded |
| Bar section | 1/2″ x 1/4″ |
| Projection (from door face) | 1″ (25 mm) |
| Center to center | 5″ (126 mm), 7.5″ (190 mm), 10″ (254 mm), 12.5″ (318 mm) |
| Mount | Thru-front, 2 holes; 2 x 1 7/8″ break-off 8-32 screws included |
| Door thickness | Standard drawer and door fronts; included 8-32 screws break to length |
| Finishes | Brushed, Polished, Matte Black, Satin Brass PVD, White |
| Applications | Kitchen cabinets and drawers, bath vanities, laundry and closet millwork |
| Origin | Designed and assembled in Vancouver, BC |
| Shipping | In-stock orders ship in 1-3 workdays from Vancouver, BC; free shipping on orders over $500; ships to Canada and US |
| Warranty | Limited lifetime residential warranty on materials and workmanship (commercial: 5 yr brushed stainless, 2 yr coated). Full terms: jwlhome.com/warranty |
| Downloads | DWG (CAD) for each size, 3D model, PDF spec sheets |
| Size (center to center) | Typically used on |
| 5″ (126 mm) | Upper cabinets, small drawers and vanity doors |
| 7.5″ (190 mm) | Standard drawer banks, base cabinet doors and pantry doors |
| 10″ (254 mm) | Pot drawers, wide base cabinets and dishwasher panels |
| 12.5″ (318 mm) | The widest drawers, integrated fridge fronts and appliance panels |
Measure existing holes before ordering: ‘J’ and ‘L’ spacing is in inches (126/190/254/318 mm), a few millimetres off the 128/192/256/320 mm metric standard. As a rule of thumb, keep the pull at one-third to one-half of the front width and step sizes within the series, so one profile covers a whole kitchen.
Both pulls use the same 1/2″ x 1/4″ bar, hand-welded from solid 304 stainless steel with no visible fixings. The ‘J’ and ‘L’ are mirror images of one another: identical bar and squared ends, with the return running the opposite way. Use one on its own, or pair them so the returns mirror across a pair of doors or a run of drawers. Both line up visually with JWL’s ‘J’ and ‘L’ door handles and appliance handles in the same finish.
Two 1 7/8″ break-off 8-32 screws are included with each pull. Drill two 5 mm holes at the center-to-center spacing of the size ordered (126, 190, 254 or 318 mm), snap each screw at the groove closest to the front thickness, and tighten from inside the drawer or door. Standard 3/4″ (19 mm) fronts need no extra hardware; for unusually thick fronts, buy longer 8-32 machine screws locally. DWG, 3D and PDF spec sheet downloads are on the page.
Only the handing. The ‘J’ and ‘L’ are mirror images of one another: both have squared ends on the same bar, with the return on opposite sides. Bar section, projection, sizes, finishes and price are identical, so they can be mixed across one kitchen or paired so the returns mirror across two doors.
5″ (126 mm) suits upper cabinets, small drawers and vanity doors. 7.5″ (190 mm) suits standard drawer banks, base cabinet doors and pantry doors. 10″ (254 mm) suits pot drawers, wide base cabinets and dishwasher panels. 12.5″ (318 mm) suits the widest drawers, integrated fridge fronts and appliance panels. All four share the same 1″ projection, 1/2″ x 1/4″ bar section and five finishes, so you can mix sizes across one kitchen without a visible change in profile.
Only if the existing holes are 126, 190, 254 or 318 mm apart (5″, 7.5″, 10″ or 12.5″). Many fronts are drilled to the metric standard (128, 192, 256 or 320 mm), which is a few millimetres off and will not align. For metric-drilled fronts choose the JWL ‘I’ cabinet pull; for new fronts, drill 5 mm holes at the spacing of the size ordered.
Projection is 1″ (25 mm) from the front face to the outside of the bar on every size, with roughly 3/4″ of finger clearance behind it. That is low enough to clear most fridge and dishwasher doors and to avoid clashing at inside corners, but check corner cabinets where two fronts meet at 90 degrees.
Yes. Brushed, Polished, Matte Black, Satin Brass PVD and White are the same five finishes used across JWL’s ‘I’, ‘J’, ‘L’, ‘U’ and ‘P’ door handles, appliance handles and the ‘T’ Series knob, all on 304 stainless steel. Order every item in the same finish name and it will match; see the hardware samples page to confirm colour before a large order.
In-stock orders ship in 1-3 workdays from Vancouver, BC, to Canada and the US, with free shipping on orders over $500. JWL cabinet pulls carry a limited lifetime residential warranty on materials and workmanship; commercial use is covered 5 years for brushed stainless and 2 years for coated finishes. Full terms at jwlhome.com/warranty.
★★★★★★★★★★4.9 out of 5from 16 verified buyers of this product
Very helpful they made sure that I had the right parts as they are polarized left and right which I didn’t understand they got me fixed up and except for the United States. Post office screwing up the delivery. Everything was perfect.
The JWL folks made sure I understood that this cabinet pull had two specific orientations Right hand and Left hand, which I didn't realize. They proactivly communicated with me and after some drawing exchanges, they sent me the right parts for my application! They were fantastic! USPS delivered to the wrong address and these parts come from China I think, so it took a few weeks to receive ... hence the 3-star shipping. But ignoring that, these folks are great and the product is as advertised!!
I love my new handles
This Item is very nice and the sell was very good!!!!
The website is confusing. It never makes it clear that the pulls do not come as one set. You have to purchase 2 to get the look shown in the photos.
we scoured the internet for just the right handles for our kitchen - and these were the winner. Seller was easy to contact and communicated in timely manner to assure us he understood the order details. Was informed of shipping milestones along the way, so there was no worry on our part.
The cabinet hardware is very modern looking as I wanted. Substantial metal weight makes it feel expensive, not cheap. Shipping was great too. I am very pleased with them.
These handles are the perfect accent to any cabinet. I own in the brass and the black. My husband & kids are all tall, so was able to adjust the style and shape so they didn’t have to bend down too far and get a good grip on the cabinet doors depending on the size & location of mg doors.
It is a beautiful piece! In addition before sending the pulls, the shop owner reached out to confirm my order and ensure it’s accuracy. MUCH APPRECIATED on the quality of product & service!
Beautiful quality pulls that go well with the lines in the vanity
the item matched the description
Reviews come from verified buyers of this product across all JWL sales channels and are shown unedited. 5 more buyers left a star rating without a comment.
Email: [email protected]
© JWL Hardware – All Rights Reserved
Trade Accounts | Privacy Policy | Site Map | Terms & Conditions
384-8250 Manitoba St., Vancouver
BC, Canada, V5X-0L6
Marcia Shapiro –
Fantastic products and customer service. I ordered a few wrong items and they made return and exchange very easy and timely. Very polite and responsive.