Modern Cabinet Pull Design
• Solid stainless steel construction
• 2 x 1 7/8″ break-off mounting screws included
• See available downloads below for CAD – 3D – PDF Specifications
Description
The L318 is JWL’s ‘L’ Series cabinet pull at 12.5″ (318 mm) center to center: a hand-welded solid 304 stainless steel bar, both ends squared, thru-front mounted, projecting 1″ (25 mm). It is the size for the widest drawers, integrated fridge and dishwasher panels and handleless-look millwork; the series runs 5″, 7.5″, 10″ and 12.5″ (126, 190, 254 and 318 mm) so one profile covers a whole kitchen. Designed and assembled in Vancouver, BC; in-stock orders ship in 1-3 workdays.
Specifications
| Profile | ‘L’ – both ends squared |
| Material | Solid 304 stainless steel, hand-welded |
| Bar section | 1/2″ x 1/4″ |
| Projection (from door face) | 1″ (25 mm) |
| Center to center | 12.5″ (318 mm) |
| Mount | Thru-front, 2 holes; 2 x 1 7/8″ break-off 8-32 screws included |
| Door thickness | Standard drawer and door fronts; included 8-32 screws break to length |
| Finishes | Brushed, Polished, Matte Black, Satin Brass PVD, White |
| Applications | Kitchen cabinets, the widest drawers, integrated fridge fronts and appliance panels; bath vanities, laundry and closet millwork |
| Origin | Designed and assembled in Vancouver, BC |
| Shipping | In-stock orders ship in 1-3 workdays from Vancouver, BC; free shipping on orders over $500; ships to Canada and US |
| Warranty | Limited lifetime residential warranty on materials and workmanship (commercial: 5 yr brushed stainless, 2 yr coated). Full terms: jwlhome.com/warranty |
| Downloads | DWG (CAD), 3D model, PDF spec sheet |
Profile
The ‘L’ profile has both ends cut square, giving a crisp, rectilinear line that matches JWL’s ‘L’ Series door handles. The bar section is 1/2″ x 1/4″, hand-welded from solid 304 stainless steel with no visible fixings. Use it where the cabinet hardware should align visually with squared-end entry or pantry door handles in the same finish.
Sizing
Center to center is 12.5″ (318 mm); measure existing holes before ordering, because JWL’s ‘L’ spacing is in inches (126/190/254/318 mm), a few millimetres off the 128/192/256/320 mm metric standard. Use this size for the widest drawers, integrated fridge fronts and appliance panels. As a rule of thumb, keep the pull at one-third to one-half of the front width and step sizes within the series.
Installation
Two 1 7/8″ break-off 8-32 screws are included. Drill two 5 mm holes at 12.5″ (318 mm) on center, snap each screw at the groove closest to the front thickness, and tighten from inside the drawer or door. Standard 3/4″ (19 mm) fronts need no extra hardware; for unusually thick fronts, buy longer 8-32 machine screws locally. DWG, 3D and PDF spec sheet downloads are on the page.
Frequently asked
Which ‘L’ Series size do I need, and what are the other sizes?
The L318 is 12.5″ (318 mm) center to center and suits the widest drawers, integrated fridge fronts and appliance panels. The other ‘L’ Series sizes are 5″ (126 mm) at https://jwlhome.com/product/cabinet-handle-5-inch/; 7.5″ (190 mm) at https://jwlhome.com/product/cabinet-handle-7-inch/; 10″ (254 mm) at https://jwlhome.com/product/cabinet-handle-10-inch/. All four share the same 1″ projection, 1/2″ x 1/4″ bar section and five finishes, so you can mix sizes across one kitchen without a visible change in profile.
Will this pull fit holes drilled for another brand?
Only if the existing holes are 318 mm (12.5″) apart. Many fronts are drilled to the metric standard (320 mm), which is a few millimetres off and will not align. For metric-drilled fronts choose the JWL ‘I’ Series; for new fronts, drill 5 mm holes at 12.5″ (318 mm) on center.
How far does the pull stand off the front, and will it clear appliances and adjacent doors?
Projection is 1″ (25 mm) from the front face to the outside of the bar, with roughly 3/4″ of finger clearance behind it. That is low enough to clear most fridge and dishwasher doors and to avoid clashing at inside corners, but check corner cabinets where two fronts meet at 90 degrees.
Do the finishes match JWL door handles and appliance handles?
Yes. Brushed, Polished, Matte Black, Satin Brass PVD and White are the same five finishes used across JWL’s ‘I’, ‘J’, ‘L’, ‘U’ and ‘P’ door handles, appliance handles and the ‘T’ Series knob, all on 304 stainless steel. Order every item in the same finish name and it will match; see the hardware samples page to confirm colour before a large order.
What is the lead time, and what warranty applies?
In-stock orders ship in 1-3 workdays from Vancouver, BC, to Canada and the US, with free shipping on orders over $500. JWL cabinet pulls carry a limited lifetime residential warranty on materials and workmanship; commercial use is covered 5 years for brushed stainless and 2 years for coated finishes. Full terms at jwlhome.com/warranty.
