USD $219.90 USD $399.00Price range: USD $219.90 through USD $399.00
Glass door handle / towel bar
• Solid stainless steel construction
• Connection hardware included for glass thickness ranging from 3/8″ [10mm] and 1/2″ [12mm]
• Available downloads below for CAD – 3D – PDF Specifications
FOR OPTIONAL COLOR MATCHING OR SPLIT FINISH BACKPLATES:
A glass door set in solid 304 stainless steel pairing a ‘J’ towel bar on the inside face with a pull knob on the outside, fixed through the glass as one assembly with a 2″ (51 mm) projection per side, in 18-1/2″, 24-1/2″ and 30-1/2″ lengths. It is used on frameless shower and walk-in enclosure doors that are pushed open from outside and need a towel rail inside. Designed and assembled in Vancouver, BC; ships in 1–3 workdays.
| Profile | ‘J’ towel bar (one rounded end, one squared) inside; round pull knob outside |
| Material | Solid 304 stainless steel, hand-welded |
| Bar section | 1″ x 1/2″ D-profile (towel bar) |
| Projection (from door face) | 2″ (51 mm) per side; 2 3/8″ (60 mm) per side with optional backplates |
| Overall length | 18-1/2″, 24-1/2″, 30-1/2″ (towel bar) |
| Center to center | See PDF spec sheet for the selected length |
| Mount | Back-to-back through the glass; connection hardware included |
| Glass thickness | fits 3/8″ and 1/2″ (10–12 mm) tempered glass. Gaskets included. |
| Glass hole | 3/8″ (10 mm) or as per glass manufacturer spec. Do not drill tempered glass; holes must be cut before tempering. |
| Finishes | Brushed, Polished, Matte Black, Satin Brass PVD, White |
| Applications | Frameless shower doors, walk-in enclosures, wet-room doors |
| Origin | Designed and assembled in Vancouver, BC |
| Shipping | In-stock orders ship in 1–3 workdays from Vancouver, BC; free shipping on orders over (Canada and US) |
| Warranty | Limited lifetime residential warranty on materials and workmanship (commercial: 5 yr brushed stainless, 2 yr coated). Full terms: jwlhome.com/warranty |
| Downloads | DWG (CAD), 3D, PDF spec sheet |
The ‘J’ towel bar has one rounded end and one squared end, made from 1″ x 1/2″ D-profile stainless bar and hand-welded. The rounded end is normally set at the top, the squared end at the bottom near the door edge. The outside pull knob is a plain cylinder in the same finish: Brushed, Polished, Matte Black, Satin Brass PVD or White.
The towel bar and knob thread together through holes in the glass; connection hardware is included. The knob shares the upper hole with the towel bar’s top leg, so only two holes are needed. Suitable for 3/8″ and 1/2″ (10–12 mm) tempered glass. Optional colour-matched or split-finish backplates are sold separately and raise projection to 2 3/8″ (60 mm). DWG, 3D and PDF downloads available.
Rinse and dry after showering; clean with mild soap and a soft cloth. Avoid abrasive pads, bleach and acidic descalers on the coated finishes. Limited lifetime residential warranty on materials and workmanship (commercial: 5 yr brushed stainless, 2 yr coated). Full terms: jwlhome.com/warranty
The towel bar comes in 18-1/2″, 24-1/2″ and 30-1/2″ lengths. An 18-1/2″ bar holds one folded bath towel; 24-1/2″ and 30-1/2″ hold two or a bath sheet. Check the center-to-center on the PDF spec sheet against your glass drilling, because the bar length fixes the hole spacing.
The towel bar and knob set is intended for 3/8″ and 1/2″ (10–12 mm) tempered glass, the usual range for frameless shower doors, and connection hardware for the glass is included. For glass outside that range, contact JWL before ordering. Holes must be cut before tempering; do not drill tempered glass.
All three put a towel bar inside and a knob outside. The J bar has one rounded end and one squared end; the L bar has both ends squared; the U bar has both ends returning to the glass symmetrically and is the lowest-priced. Choose by the door handle profile used elsewhere in the home.
Each set is supplied in one finish — Brushed, Polished, Matte Black, Satin Brass PVD or White. To introduce a second colour, JWL sells optional split-finish or colour-matched backplates separately; they fit between the hardware and the glass and add 3/8″ of projection per side.
In-stock sets ship in 1–3 workdays from Vancouver, BC to Canada and the US; orders over ship free. The set carries a limited lifetime residential warranty on materials and workmanship (commercial: 5 yr brushed stainless, 2 yr coated). Full terms are at jwlhome.com/warranty.
Email: [email protected]
© JWL Hardware – All Rights Reserved
Trade Accounts | Privacy Policy | Site Map | Terms & Conditions
384-8250 Manitoba St., Vancouver
BC, Canada, V5X-0L6
